En Komodo Luxury, nos especializamos en Phinisi Construcción de Barcos Indonesia, combinando la artesanía de Sulawesi con la ingeniería moderna. Cada Phinisi se construye prestando una meticulosa atención al detalle, desde el casco hasta los lujosos interiores, lo que garantiza un alto rendimiento listo para el chárter.
Nuestro Phinisi están diseñados para ofrecer un potencial de inversión a largo plazo. Construidos con materiales sostenibles como la teca y la madera de hierro, cada yate cumple con las normas reglamentarias para el alquiler internacional. Desde las fases de diseño hasta la entrega final, nos aseguramos de que su yate sea una inversión de calidad, listo para generar excelentes beneficios por alquiler.
Komodo Luxury ofrece Phinisi Construcción de Barcos yate de lujo Indonesia yate de lujo la propiedad de un yate en una inversión de alto rendimiento. Como parte del programa Construcción de Barcos inversión de primer nivel Indonesia, combinamos la legendaria artesanía indonesia con una gestión integral de yates y acceso exclusivo al mercado exclusivo en Komodo, Raja Ampat, Baliy Labuan Bajo. Desde el diseño hasta la entrega, cada detalle está pensado para ofrecer rendimiento y lujo.
Yes — Komodo Luxury is a boat builder, and construction is contracted through PT Komodo Galangan Nusantara, the shipbuilding entity of the group. Since 2015 we have designed, built, and operated custom phinisi and liveaboard yachts, constructed with master shipwrights at the phinisi yards of Bira and Tana Beru in Bulukumba, South Sulawesi, and delivered to charter standard with BKI class support. We are also an operator, not only a yard: the group charters the vessels it builds across Komodo and Raja Ampat, and holds TripAdvisor Travelers’ Choice recognition for that fleet — so every hull we lay down is one we are prepared to run ourselves. New builds, completion of unfinished projects, and construction from your own plans are all handled by one accountable team from first drawing to sea trials.
Building a custom phinisi in Indonesia typically costs between USD 300,000 and USD 4,000,000 at published market ranges, with 40 m+ superyacht-class projects reaching USD 10 million or more. The final figure depends on hull length, timber grade, engineering systems, and the level of interior fit-out — which is why every Komodo Luxury build starts with a written specification and a fixed, milestone-based quotation rather than a per-metre estimate.
| Clase de buque | Typical configuration | Indicative cost (market range) |
|---|---|---|
| 20–30 m phinisi | Private or boutique liveaboard, 2–4 cabins | USD 300,000 – 1,500,000 |
| 30–40 m luxury phinisi | Charter-standard, 4–6 cabins, full guest systems | USD 700,000 – 4,000,000 |
| 40 m+ superyacht-class | Bespoke flagship, expedition-grade systems | USD 1,800,000 – 10,000,000+ |
How these ranges are set. They are compiled by the Komodo Luxury build desk from published Indonesian yard price guides, then cross-checked against the specification structure this desk quotes against at the Bira and Tana Beru yards in Bulukumba, South Sulawesi. Currency is USD throughout; Indonesian government and classification fees are quoted separately in IDR at the rate of the day. Ranges are for planning, not quotation — your specification sets the final price. Last reviewed by the build desk on 19 August 2026.
The category-by-category breakdown of a real 30–35 m contract — hull and structure, interior fit-out, machinery, systems, design supervision and statutory work — is set out in full further down this page under what a 30–35 m build budget actually covers, together with the method used to allocate it. A wider multi-vessel comparison across speedboats, fibreglass yachts, dive liveaboards and steel hulls is maintained separately at Boat Construction Indonesia.
Does it cost less to build a boat in Indonesia than in Europe? Generally, yes. Published Indonesian phinisi build ranges sit in the hundreds of thousands to low millions of US dollars — a bracket where comparable Western custom builds of similar size and finish typically only begin. The difference comes mainly from skilled labour rates and direct access to certified tropical hardwoods, not from lower build standards: our vessels are finished to the same charter standard we operate ourselves across the Komodo and Raja Ampat fleet. Owners planning to charter their vessel can review the economics on our boat investment page.
A custom phinisi typically takes 10 to 30 months from keel laying to handover, depending on vessel size and interior complexity. Published Indonesian build guides place a 20–25 m vessel at roughly 10–14 months, a mid-size luxury build at 18–24 months, and superyacht-class projects at 24–30+ months. Hull construction is the longest single phase; design, systems installation, and fit-out run before and after it.
| Clase de buque | Hull construction | Keel-to-handover (market range) |
|---|---|---|
| 20–25 m | ~8–12 months | 10–14 months |
| 30–40 m | ~12–18 months | 18–24 months |
| 40 m+ | ~18–24+ months | 24–30+ months |
Timelines hold when three things are managed early: the design package is frozen before the keel is laid, timber is sourced and seasoned in advance, and one team supervises the yard continuously. That is how our five-stage process above is structured — naval architecture and interior decisions are completed with our boat design service first, so the yard never waits on drawings. Every build concludes with sea trials and a documented handover, and you can see the results among recently launched phinisi yachts from the wider Komodo Luxury group, alongside our own Ayvara and Vinca portfolio above.
If a multi-season build timeline does not fit your plans, our sale desk lists pre-owned phinisi for sale that can be surveyed, transferred and earning within a single season.
Komodo Luxury completes boat builds that other yards started. If your project has stalled — a yard that closed, a builder who under-delivered, or a hull that outgrew its original team — we take it over and carry it to launch. The process starts with an on-location hull survey and structural audit wherever the vessel stands: our teams travel to yards across Indonesia, from Bira and Tana Beru in Bulukumba to Kendari and beyond. We then issue a written condition report, a revised specification, and a milestone-based completion schedule before any work begins.
Takeover requests are a growing share of our build desk inquiries — a recent example is a 53-metre, 8-cabin charter build at 40% completion, structurally finished but still needing systems, fit-out, and certification to reach delivery. Projects at that stage benefit most from what we already run daily: naval architecture review, yard supervision, BKI class documentation, sea trials, and documented handover. Where the structural audit reveals remedial work, our boat repair team completes it within the same schedule.
You can bring your own plans — we build them. Alongside traditional wooden phinisi, Komodo Luxury constructs steel, aluminium, and FRP hulls from owner-supplied design packages: internationally published stock plans, CNC-cut kit designs, or a full custom package from your own designer. Every package is reviewed by the naval architects behind our boat design service — stability, scantlings, and buildability at Indonesian yards — before we issue a fixed, milestone-based quotation. CNC-cut steel and aluminium kits are precision-cut to your drawings, welded and faired in-yard, then finished to the same charter standard as our wooden fleet. If your plans are incomplete — hull lines without systems engineering, or a sail plan without an interior — our designers complete the package first, so the yard never waits on drawings.
Choose a phinisi shipyard by verifying four things before any deposit: launched vessels you can physically board, a written milestone-based contract, classification support, and continuous build supervision. Price alone is the least reliable signal — the lowest-priced keel in the yard is rarely the lowest-cost boat at sea.
A sound build contract includes a full technical specification annex, general arrangement drawings, a milestone schedule with the payment plan tied to it, the materials specification, a variation-order procedure, sea-trial acceptance criteria, and warranty terms. If any of these is missing, the contract is not ready to sign.
Komodo Luxury builds with master shipwrights in Bulukumba, South Sulawesi — the home of Indonesia's phinisi tradition, centred on the phinisi yards of Bira and Tana Beru — and manages the entire process end-to-end: design, yard supervision, certification, sea trials, and delivery. First-time owners can also read this step-by-step guide to commissioning a phinisi, then start with a private consultation on WhatsApp.
A well-maintained wooden phinisi is commonly cited in published guides to last 15–30 years, and teak-built hulls can exceed 30 years with disciplined annual care. Longevity is decided twice: first at the yard, by timber selection and seasoning, and then every year afterwards, by the maintenance program.
The best wood for a phinisi follows the traditional pairing: ulin (Bornean ironwood) for the keel and frames — exceptionally dense and marine-borer resistant — and teak for planking, decks, and interiors, where its natural oils resist rot and weathering. Yes, teak is genuinely good for boat building; it has been the benchmark marine timber for centuries, which is why we combine both species in our builds, sourced legally and seasoned before a single frame is raised. For a wider comparison of marine timbers, see our guide to the types of wood used for boats.
After launch, lifespan is a maintenance question. Owners who keep their vessel with us move straight into a structured care program under boat management, with refit and dry-dock work handled by our boat repair team — one accountable group from keel laying through every year the vessel sails.
A realistic all-in budget for a 30–35 m charter-standard phinisi splits roughly into eight categories: hull and structure take about a third, interior fit-out is the second-largest line, and machinery, systems, design supervision and statutory work absorb the rest. An owner-held contingency sits outside the yard price. The table below allocates a reference contract value across those categories.
| Budget category | Share of contract value | Indicative USD (30–35 m) | What sits inside the line |
|---|---|---|---|
| Hull & structure | 30–36% | 360,000 – 940,000 | Ulin keel and frames, teak planking, caulking, sealing, yard labour |
| Interior fit-out & joinery | 18–26% | 215,000 – 680,000 | Cabins, saloon, galley, heads, soft goods, finishes — the widest band on the page |
| Propulsion & machinery | 12–17% | 145,000 – 445,000 | Main engines, gearboxes, shafting, steering, generators, tankage |
| Systems & electrical | 10–14% | 120,000 – 365,000 | Electrics, air-conditioning, watermaker, plumbing, bilge and fire systems |
| Design, naval architecture & supervision | 5–8% | 60,000 – 210,000 | General arrangement, stability and scantlings, continuous yard supervision |
| Deck equipment, rigging & tenders | 4–7% | 48,000 – 180,000 | Windlass, davits, rig and sails, tender, dive compressor and water toys |
| Navigation, safety & communications | 4–6% | 48,000 – 155,000 | Bridge electronics, liferafts, EPIRB, firefighting, satellite communications |
| Class, survey, registration & statutory | 1.5–3% | 18,000 – 78,000 | BKI class support, tonnage measurement, registration, safety certification |
| Owner contingency (held outside the yard price) | 8–12% | 96,000 – 310,000 | Variation orders, specification upgrades, currency movement, delivery voyage |
How this table was built. Category shares are the specification structure our build desk quotes against; the USD column applies those shares to a reference contract value of USD 1.2–2.6 million, the part of the published 30–40 m range above that a charter-standard 30–35 m specification usually occupies. Figures are indicative allocations for planning, not a quotation, and exclude owner-supplied equipment, delivery voyage crew, and import duties in a foreign registry. Category shares are stated to sum to roughly 100% at their mid-points; contingency is additional. Prepared by the Komodo Luxury Build Desk, reviewed 19 August 2026.
Two lines move the total more than any other: interior fit-out and machinery. A dive-focused layout with a working deck and a luxury charter interior on the same hull can differ by a seven-figure sum, which is why the specification is frozen with our boat design team before the keel is laid. Owners who intend to charter should read the same numbers alongside the returns modelled on our yacht investment page.
Pay an Indonesian shipyard against verified build milestones, never against calendar dates. Each release should be conditional on a physical stage a surveyor can inspect, with a retention held past delivery. The schedule below is the milestone structure Komodo Luxury writes into its build contracts, issued by PT Komodo Galangan Nusantara.
| Stage | Release condition (verified before payment) | Share of contract |
|---|---|---|
| 1. Contract & design freeze | Signed general arrangement, technical specification annex and milestone schedule | 15% |
| 2. Keel laid, frames erected | Surveyor report plus dated photographic record at the yard | 20% |
| 3. Hull planked, caulked, sealed | Structural sign-off against the scantlings in the specification | 20% |
| 4. Machinery installed and aligned | Main engines, gensets and shafting installed, alignment recorded | 15% |
| 5. Systems complete, interior fitted | Electrical, plumbing, HVAC commissioned; joinery and finishes accepted | 15% |
| 6. Sea trials and documented handover | Trial acceptance criteria met; certificates and document pack delivered | 10% |
| 7. Retention release | Held to the end of the agreed defects-liability period after delivery | 5% |
Provenance. Stage weightings are the standard schedule used in Komodo Luxury build contracts; individual contracts vary with vessel size, material and owner-supplied scope. Shares total 100%. Reviewed 19 August 2026 by the Komodo Luxury Build Desk.
Copy this list into your request for proposal and ask every yard to respond to it line by line. A builder who cannot answer these in writing is telling you something useful.
Ask for the yard’s company deed and business identification number and check the legal entity actually signing; ask for two vessels delivered in the last three years and contact those owners directly; ask who carries the naval architecture and whether class survey reports exist; walk the yard and count hulls in progress against the workforce present. Verify the entity, the references, the engineering and the capacity — in that order. Contracts for construction, repair and vessel sale in our group are issued by PT Komodo Galangan Nusantara; management contracts by PT Komodo Vessel Management; brokerage and charter marketing by PT Komodo Bahari Nusantara. Separate contracts, separate fees, separate ledgers.
A foreign investor building a commercial charter yacht in Indonesia works through four separate approvals: an Indonesian legal entity to own the vessel, classification and tonnage measurement, flag registration, and a sea-transport business licence before the first paying guest boards. Class and registration run in parallel with the build; the licence follows the vessel’s papers.
| What it governs | Body or instrument | Why it matters to the build | Where to verify |
|---|---|---|---|
| Classification and survey | Biro Klasifikasi Indonesia (BKI) | Class notation drives scantlings, machinery approval and the survey cycle from first steel or first frame | bki.co.id |
| Tonnage measurement (GT) | Measurement certificate issued under the Ministry of Transportation | Gross tonnage sets the certification tier, minimum crewing and statutory fees for the vessel’s whole life | dephub.go.id |
| Registration and flag | Directorate General of Sea Transportation | Indonesian flag and the deed of registry establish title and nationality; mortgage registration depends on it | dephub.go.id |
| Seaworthiness and safety certification | Harbourmaster (Syahbandar) | Safety equipment, manning and sailing approval — the practical gate before every departure | dephub.go.id |
| Commercial carriage of passengers | Sea transport business licence held by an Indonesian legal entity | Charter revenue requires the licence to sit with the operating company, not with the vessel | oss.go.id |
| Foreign ownership and company form | Foreign investment company (PT PMA) via the online single submission system | Decides who may hold the vessel and at what shareholding; set this up before the keel, not after launch | oss.go.id |
| Domestic carriage (cabotage) | Law No. 17 of 2008 on Shipping | Domestic commercial voyages are reserved for Indonesian-flagged vessels, which shapes the ownership plan | dephub.go.id |
Provenance and limits. This table maps the approvals a build project touches and points to the issuing bodies; it is a planning map compiled by the Komodo Luxury Build Desk on 19 August 2026, not legal advice, and it states no licence held by us. Requirements, thresholds and fees change — confirm the current position with the issuing authority and Indonesian maritime counsel before signing anything.
Most foreign owners who intend to earn charter income in Komodo and Raja Ampat end up with the same shape: an Indonesian company holding the vessel and the sea-transport licence, the vessel on the Indonesian flag, and a written management agreement covering crew, maintenance and revenue reporting. Private, non-revenue use of a foreign-flagged yacht follows a different route through temporary import and cruising permits. Decide which of the two you are building for before the design is frozen — the answer changes the specification, the certification tier and the crewing plan. Post-delivery operation is handled under boat management, and the revenue side is modelled on our yacht investment page.
Tell us what you want to build — a new phinisi, a takeover completion, or a hull from your own plans — and our build desk replies on WhatsApp within one hour with the next step: a short specification call, then a written, milestone-based quotation in USD. Message +62 811-3823-875 for your free project quote — no obligation.
Te guiamos en cada etapa clave de la construcción a medida Phinisi Construcción de Barcos yate de lujo Indonesia. Desde la idea yate de lujo hasta la botadura, nuestro proceso está diseñado a medida para clientes de alto nivel que buscan una experiencia fluida y transparente con valor a largo plazo.
Cada Phinisi comienza con una visión. Nuestro equipo de diseñadores expertos y arquitectos navales colabora estrechamente contigo para hacer realidad el yate de tus sueños. Tanto si buscas una estética tradicional en madera como un diseño moderno y lujoso, te guiamos en cada decisión de diseño, asegurándonos de que cada detalle se ajuste a tus expectativas.
La fuerza y la belleza de un Phinisi provienen de sus materiales. Para nuestros barcos, utilizamos exclusivamente madera de teca, madera de hierro y metales de grado marino de la más alta calidad. Damos prioridad al abastecimiento sostenible para minimizar el impacto medioambiental, al tiempo que nos aseguramos de que cada yate se construya para soportar los retos del mar abierto. Saber Más los materiales que utilizamos en la siguiente sección.
Nuestros expertos constructores navales de Bulukumba, en Sulawesi, utilizan técnicas tradicionales combinadas con métodos de construcción modernos para fabricar cada embarcación. Primero se construye el casco, y a continuación se realizan la cubierta, los acabados interiores y los equipamientos de lujo. Nuestro equipo se asegura de que cada componente cumpla con estrictas normas de seguridad y calidad en cada fase del proceso.
Llevamos a cabo exhaustivas inspecciones de control de calidad en cada fase de la construcción para garantizar que el yate sea seguro, fiable y esté listo para su uso. Todas nuestras embarcaciones se construyen de conformidad con las normativas internacionales de seguridad y las certificaciones de alquiler. Nos aseguramos de que se cumplan todas las certificaciones de clasificación y las normas reglamentarias antes de entregarle su yate.
Una vez finalizada la construcción del yate, programamos una inspección final, seguida de pruebas en el mar para comprobar el rendimiento de la embarcación. Tras superar todas las inspecciones, su embarcación estará oficialmente lista para serle entregada, acompañada de toda la documentación, certificaciones y garantías necesarias.
Ofrecemos oportunidades de inversión en yates «llave en mano» diseñadas para inversores exigentes que buscan proyectos rentables en el yate de lujo . Desde Construcción de Barcos a medida Construcción de Barcos Komodo hasta yate de lujo en Bali, nuestro programa integrado garantiza un funcionamiento impecable y una rentabilidad constante de los servicios de alquiler.
Con nuestros servicios de gestión de embarcaciones en Indonesia, podrá disfrutar de la propiedad de un yate sin preocupaciones. Nos encargamos de todo, desde la gestión de la tripulación hasta el mantenimiento periódico, garantizando que su yate esté listo para el alquiler en todo momento.
Nuestro equipo de expertos en hostelería se encarga de ofrecer un servicio y una gestión de primera categoría, lo que garantiza el rendimiento óptimo de su yate y los máximos ingresos por alquiler.
Consigue una presencia inmediata en el mercado de los chárters de lujo en Bali, Komodo, Raja Ampat y Labuan Bajo. Nuestra red de clientes de alto poder adquisitivo garantiza una alta ocupación e ingresos constantes.
Nuestros inversores obtienen una rentabilidad media anual del 25-35 %, gracias a la fuerte demanda de yate de lujo en destinos muy solicitados como Komodo y Bali.
En Komodo Luxury, combinamos la artesanía tradicional de los famosos Phinisi de Sulawesi con el lujo moderno para crear yates que son a la vez culturalmente ricos y sostenibles. Fabricados con materiales ecológicos como la teca y el palo de hierro de origen sostenible, nuestros yates reflejan un compromiso tanto con el patrimonio como con la responsabilidad medioambiental. Construidos en Bulukumba por artesanos expertos, cada yate combina una artesanía atemporal con el lujo sostenible, garantizando una embarcación que resiste el paso del tiempo y ofrece un valor a largo plazo.
Nos aseguramos de que todas las embarcaciones que construimos cumplan plenamente con las normas internacionales de seguridad y con los rigurosos requisitos para su puesta en servicio como embarcaciones de alquiler. Cada yate se somete a un minucioso proceso de certificación, que incluye inspecciones por parte de sociedades de clasificación como BKI (Biro Klasifikasi Indonesia) y SORA (Safety of Life at Sea), así como otras autorizaciones necesarias del Estado de abanderamiento.
Además, garantizamos el control de calidad durante todo el proceso de construcción y nos aseguramos de que nuestras embarcaciones estén listas para operar a nivel internacional desde el mismo día de su botadura.
Tu socio de confianza en inversión en yates y alquiler de lujo
Cada yate está construido a mano por la élite IndonesiaPhinisi , lo que garantiza una calidad inigualable en la construcción tradicional de embarcaciones de madera.
Nuestro Bali colabora estrechamente contigo para crear yates que se adapten exactamente a tus preferencias y objetivos de inversión.
Desde la contratación de tripulaciones profesionales hasta la gestión fluida de los yates y un mantenimiento meticuloso, nuestro equipo especializado garantiza un servicio de gestión de yates impecable en toda Indonesia.
Accede de inmediato a un próspero mercado de alquiler de lujosos yates en Bali, Komodo, Raja Ampat y más allá, con el respaldo de nuestra galardonada plataforma de turismo de lujo.
Explore selección de yates a medida construidos con éxito y alquilados de forma rentable en los destinos más codiciados Indonesia, como Komodo, Raja Ampat y Bali.
Su yate es más que un proyecto apasionante. Es una inversión a largo plazo. Diseñemos, construyamos y botemos juntos un legado. Solicite una consulta de diseño o información sobre inversiones.
¿Listo para empezar tu Phinisi ? Solicita una consulta hoy mismo para hablar sobre el diseño personalizado de tu yate o informarte sobre oportunidades de inversión. Nuestros expertos están aquí para guiarte en cada paso del proceso.
Invierte en la excelencia náutica: hazte propietario y gestiona tu yate de lujo
Komodo Luxury ofrece un ecosistema integral para yate de lujo , que abarca Phinisi , la gestión profesional de yates y la venta exclusivo . Maximice su retorno de la inversión con soluciones de clase mundial diseñadas a medida para personas con un elevado patrimonio neto.
AUTORIDAD MUNDIAL
Los principales medios de comunicación internacionales y publicaciones financieras que reconocen nuestro compromiso con la excelencia marítima.
Y MÁS DE 400 PRESTIGIOSOS SITIOS WEB DE NOTICIAS
Comienza tu andadura en yate de lujo en Indonesia Komodo Luxury. Desde Construcción de Barcos a medida Construcción de Barcos una gestión impecable y oportunidades de alquiler en Komodo, Bali, Labuan Bajoy Raja Ampat, nos aseguramos de que su yate se convierta en un activo rentable.
